36'' Wall-Mount 600-1200 CFM Canopy Hood, Commercial-Style

Amps
Amps	15

Auto Turn On
Auto Turn On	Auto Turn On

Blower Motor
Blower Motor	Blower Motor to be Purchased Separately

Blower Type
Blower Type	Centrifugal

Canopy Height (IN,inches)
Canopy Height (IN,inches)	8

Controls
Controls	Manual

Cook Up The Savings
Cook Up The Savings	Cook Up The Savings

Depth(IN,inches)
Depth(IN,inches)	25

Dimensions
Carton Depth	30 1/4 inch
Carton Height	24 3/4 inch
Carton Width	41 1/4 inch
Cutout Depth (in)	0 inch
Cutout Height (in)	0 inch
Cutout Width (in)	0 inch
Depth	25 inch
Height	32 3/8 inch
Width	36 inch
Gross Weight	66 inch

Duct Direction
Duct Direction	Vertical

Duct Outlet Size (in.)
Duct Outlet Size (in.)	10

Duct Type
Duct Type	Round

Filter
Filter	Dishwasher-Safe Grease Filters

GPC Code
GPC Code	10005322

Height(IN,inches)
Height(IN,inches)	32 3/8

Hood Type
Hood Type	Wall Mount

Hz
Hz	60

IsBaseUnit
isBaseUnit	true

IsConsumerUnit
isConsumerUnit	true

IsDispatchUnit
IsDispatchUnit	.

IsInvoiceUnit
IsInvoiceUnit	true

IsOrderableUnit
IsOrderableUnit	true

Location of Controls
Location of Controls	Hidden

Material
Material	Stainless Steel

Number of Night Light Settings
Number of Night Light Settings	2

Number of Task Light Settings
Number of Task Light Settings	2

Product Type
Product Type	EA

ProductOutletCategories
ProductOutletCategories	Cooking

Prop 65
Prop 65	Standard

Series
Series	Commerical-Style Series

Size (in.)
Size (in.)	36

Status Badge Espot CA
Status Badge Espot CA	New

Task Light Type
Task Light Type	Halogen

Task Lighting
Task Lighting	Yes

UDEX
UDEX	1100642102

UL
UL	UL

Venting
Venting	Exterior

Volts
Volts	120

Width (IN,inches)
Width (IN,inches)	36

• Dimension Guide

• Installation Instruction

• Use and Care

Filter by All stars 5 star only 4 star only 3 star only 2 star only 1 star only

---

Great hood but cheap components

Submited By:Pete123-01/04/19

Had this vent for 1.5 years and replaced the switch bezel twice. At 60$ for each bezel, this is a manafacturing defect. The first bezel broke on the side screw attachments the second broke on the top (see photos). The vent works well and is very quiet on the low setting. But replacing this part every 8 months will be very expensive.

commercial grade

Submited By:HB Don-09/27/17

We purchased a complete kitchen package, Refrig, convection oven/ micro combo. cooktop, hood, dishwasher and bottle cooler and absolutely love everything!!!!!!!

Switch Defect

Submited By:Yikes-11/16/17

I opted to buy this range hood when I bought my new home 11 months ago. The switch is made of plastic and broke off 2 months ago. I'm trying to schedule a warranty repair, but was unsuccessful in reaching someone. I'll try again tomorrow.

Several reviewers have mentioned that this happened to them as well. Performance wise, it's a nice range hood. I would not recommend buying this product as the plastic switch is sure to break again due to normal wear and tear of turning on/off. I recommend Kitchenaid to fix this manufacturing weakness as it will only lead to unsatisfied customer experience and issue a repair recall.

Looks good but fragile and unreliable.

Submited By:David-09/28/17

This hood is installed in our 3 year old home. The fan control switch housing is poorly designed cheap plastic, and very expensive to replace. Has broken twice already in the course of normal use. Trying to reinforce the part myself now as replacing it again is just throwing money away. The internal blower (sold seperately for an additional $500) just quit on ours too - the second in our neighborhood to fail in 3 years or less.

Broken Control Box over and over again!

Submited By:brokenhood-09/27/17

My control panel where the on off switch is keeps on breaking bc it is made of plastic. It becomes separated from the unit. It was repaired 3 times, after which I asked for a real remedy. Whirlpool said they could only replace it with a new one. I got the new one installed, same model, but within 2 months the control panel again broke and separated from the main unit! There is a major design flaw! Heat from range makes plastic break easily, and the plastic is what is holding the control panel in place! Kitchen aid needs to redesign this and come up with a permanent stronger steel fix for this unit.

Almost Great

Submited By:D.R.-09/28/17

We purchased this hood 9 months ago as part of a full kitchen renovation. While the exhaust performs extremely well and has a great appearance, my frustration with this equipment relates to a cheap piece of plastic which holds the control panel. It has now just broken for the 3rd time - and in the process of being replaced again! The appliance repair company is in the process of determining if this is a common problem - oh, yah, half of the reviews for this unit complain of this very issue - going back 3 years. Come on kitchenaid, either correct the design flaw (cheap plastic) or stop manufacturing the product. Dear Kitchenaid, are you willing to fix my unit forever free of charge or can you come up with a viable fix? If not for this frustrating issue, I would probably rate my $18,000 kitchen package 5 stars - but a 50 cent piece of plastic junk is leaving me frustrated with this purchase. I would love to hear back from Kitchenaid with a solution.

1.5 years & range hood control has broken

Submited By:Cat-09/27/17

We have a new home & the vent hood was the last thing to be installed. After 1.5 years, the range hood controls has broken from the inside where the screws do not stay screwed in. It seems to be made of cheap plastic. It is the one part I questioned after installation. Everything else is made of stainless steel.

Submited By:-09/27/17

Yes, I recommended this product.

This is a commercial hood

Submited By:New Kitchen-09/27/17

This hood fit our kitchen perfectly, the design is something you would expect in a commercial kitchen. It matches our range perfectly and installed easily.

Yes, I recommended this product.

Kitchen Aid Fix for broken Switch

Submited By:Samuel2-09/24/18

Hello frustrated fellow Kitchen aid reviewers. I like you was faced with the exact issue of the broken switch. I was also shipped a replacement switch. Nothing wrong with the switch itself. The switch actually breaks when we use it and push on the buttons. This force is what is breaking the screw as it has no support for the force being exerted on it. I realized this was a flaw from the get go. Kitchen aid folks realize I am an accountant by profession and once I realized the reason for the failure all I did was cut a block of wood and I wedged it on top of the switch that sits between the switch and the roof of the canopy.

This has solved my problem for ever. I still have the replacement part that I have yet to use and I can exert any pressure without fear.

Please others reading this do the same if not email me I can help you on how to solve for this misery. Other than than I really think the product is great.

• 1
• 2
• 3
• >
• >|

Showing 1 to 10 of 30 (3 Pages)

Extended warranties can save you hundreds, sometimes even thousands of dollars in unexpected repairs. You can contact us, or visit our store for additional details.

Let our team co-ordinate professional delivery and installation on your new purchase. Some restrictions may apply.